Specifications can be modified according to customer requirements.
Max Wire Diameter & profile wire:
0.01 – 30mm
Max winding length:
1100 mm
Max distance between points:
1200 mm
Max Winding Diameter:
800 mm
Guider precision:
0.01 mm
Main shaft motor:
Brishless Servo motor – 33.41Nm
Guider motor (Brushless):
0.4HP / 300W (2.2Nm)
Winding shaft speed:
0 – 500 / 0 – 250 rpm.*
Electrical supply:
3 x 380Vca – 50Hz
Net weight:
1200 Kg Approx.
Max load between points (coil weight):
1000 Kg
User interface:
PLC controller
Max. No. of programmable windings:
10,000 (per SD card)
Max. No. of windings per coil:
200
Type of programming:
CNC
Heavy duty coil winding machine series
Click for larger image
*The standard machine is available in two models, high speed and low speed
Torque and Speed
Belt
Position**
500 RPM version
250 RPM version
Torque (Nm)
Speed (Rpm)
Torque (Nm)
Speed (Rpm)
1
172
500
413
250
2
1033
96
1447
69
** The head has two belt positions; the position directly depends on the product to be wound
E.g. Wire cross-sectional area & Coil diameter > torque required.
The E-1200 is a large floor standing style coil winding machine, easily positioned in a factory or workshop, equipped with head and bench in galvanised steel and covered in stainless steel, fixture plate, tailstock with security closure, guider system, safety screen and foot pedal.
The winding machine is governed by numeric control and CNC electronic programming.
This machine is specially designed for the manufacture of large solenoids, power and distribution transformers (typically from 10 to 1,200 KVA), using aluminium or copper wires, including rectangular or flat wires with a special guider.
The wide range of winding speeds (up to 500 rpm) permits primary and secondary windings on the same machine, thus reducing production cycle time.
The layout and design of the winding machine facilitates the placement of ancillary materials such as end-fillers, insulation paper and foils of various types.
